ghost 2 immobiliser cost is a revolutionary immobiliser that guards against key-cloning and hacking and vehicle theft. It can reduce your insurance costs and you may even be eligible for incentives.
The Ghost immobiliser, which is discreet and simple to operate is built into the ECU of the vehicle. This means that it is impossible to start the engine without the secret PIN code.
TASSA Approved
Autowatch Ghost is the best way to stop your vehicle being stolen through key copying. It has been approved by TASSA. This is the most recent technology in car security. It can stop thieves from stealing your keys fobs and will also prevent your vehicle from starting after your keys are cloned.
This next-generation device connects to your vehicles CAN data network. A personal PIN code is entered using the standard buttons of your vehicle on the dashboard or steering wheel. The Ghost is then able to stop the engine from beginning and can be programmed to a variety of different settings like Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and doesn't make use of radio frequency signals, which means that it is not detected by RF scanning equipment or a code grabber.
The Ghost is a weatherproof tiny device that is sealed so that it can be hidden in the vehicle or installed on the dashboard where it is almost impossible for a thief to find. This is not a Thatcham Category Approved product, however it is regarded by insurance companies as an effective anti-theft device. It comes with a five-year warranty.
The TASSA verification process ensures that any installation work done on the Ghost will be completed by a trained and skilled installer. This gives the customer's, insurers' and police's confidence in the quality installation. It also ensures that the installers adhere to the manufacturer's guidelines and install the product in a safe and correct manner. The installers who are members of TASSA have an unwavering dedication to excellence and making an impact in the fight against crime.
Compatible with a wide range of vehicles
The Autowatch Ghost 2 is a innovative immobiliser that has been designed to protect your vehicle from modern key copying. The PIN code system is integrated into the car's ECU making it harder for thieves to copy keys or hack into the vehicle's system. The device is also discrete and can easily be installed in a variety of vehicles, including minivans and sports cars. It is also weatherproof and small enough to be concealed away from view which makes it more difficult for thieves to find.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with a variety of vehicles and uses the vehicle's CAN data network to communicate. Additionally, it can be disabled or turned off on the vehicle's main screen. The device is also compatible with a variety of mobile apps, making it easier to control your vehicle's security remotely.
The Ghost may have some issues following installation, despite its many benefits. These problems could be caused by a variety of causes, including defective wiring or an incompatible mobile app. In these instances the best option is to consult a professional installer to resolve the problem.
Users also experience difficulty in completing the sequence to disarm the Ghost. This is usually due users forgetting or not practising the proper sequence. The manual for the device contains an emergency code which can be used in the event that such problems arise.
Distinction
Autowatch Ghost is an advanced and discreet security system that guards against vehicle theft. This device uses the vehicle's CAN data networks to operate and is invisible to thieves, making it an extremely effective deterrent. It also has the ability to be triggered by other security systems, like car alarms, and provides real-time alerts for calls to the owner. These features can aid the police to locate your vehicle if it's stolen.
This system can be installed in just a few minutes and is compatible with the majority of vehicles. It is a TASSA approved aftermarket device compatible with vehicle trackers. Some insurance companies even recognise it. It's also tamper-proof, and quiet so that criminals won't be hearing it operate. In addition, the Ghost immobiliser can be programmed to require a PIN number of up to 20 digits which is almost impossible to guess.
Another benefit of the Ghost is that it is only activated when the vehicle is set to Service/Valet mode. This prevents you accidentally giving your PIN code to someone who requires access to the computer system of your vehicle, like mechanics. The Ghost is backed by five years of warranty.
The Autowatch Ghost is an innovative immobiliser that is able to stop key cloning as as ECU hacking, and car theft. It's an aftermarket CAN bus device that's an excellent alternative for both older and new vehicles. It's simple to install, and it operates quietly. This enables it to be used in any car without cutting wires. It also allows you to change your pin number easily so that only you are aware of it. The system doesn't also use code-grabbing or RF scanning technologies that means it's almost undetectable.
Easy to use
Autowatch Ghost is a highly efficient and innovative security system that disables the engine to stop theft of vehicles. It is operated by an individual code that is created by the owner of the vehicle. The code must be entered to allow the vehicle to start. This cutting-edge technology enhances the overall safety measures of your vehicle, making it a top choice for many drivers. The process of installing it isn't without its difficulties. It requires careful planning and attention to the smallest of details. This includes ensuring compatibility, depending on the expertise of a professional, adhering to laws and regulations, and fully knowing the Ghost II's operational functions. Prioritising these aspects ensures a successful installation and the best performance.
Unlike conventional systems unlike conventional systems, the Ghost II is silent and is not able to be detected by thieves. It is also weatherproof and compact and compact, making it hard to break into your car. It is also compatible with CAN and Lenastark, which allows it to be installed in many different vehicles. It can also be utilized in vehicles that require isolation of the battery to ensure maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your vehicle is being rented or loaned out.
Before starting the Ghost 2, you will have to enter a PIN code that is unique to you. Installers will set up a default code, but it is recommended to change it as soon as possible for your own safety. The device is able to go into sleep mode to conserve battery power, but it will awaken when it detects an engine management signal. This feature can be disabled in the Settings menu. It is recommended to utilize the Ghost immobiliser only when your vehicle is moving and to lock it when you leave it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, deters car thefts by disabling the engine of a vehicle. It operates by using a number that is unique to the owner, which makes it a potent deterrent. However, installing this device requires meticulous preparation and attention to particulars. By making sure that it is compatible, relying on professional expertise and adhering to the legal requirements and comprehensively understanding the system's functions, you can make sure that the installation process is smooth and reap the maximum benefits from this security system.
This unique CANbus-based security system is simple to install and works silently which means that criminals are unable to hear it. It uses the CAN bus to connect with your vehicle and is compatible with a broad variety of vehicles. It's a major breakthrough in vehicle security. It also shields your vehicle from key cloning, hacking and theft of your car, since it will not start without the proper pin code. It is small and weatherproof, making it difficult for criminals to alter or locate.
You'll need to find the CAN High (CAN H) & the CAN Low (CAN L) Wires on the wiring diagram of your vehicle before you begin installing the Ghost Immobiliser. Connect the CAN high and low wires to the ECU. You can find these wires under the dashboard or near the engine.
It's best to hire an accredited and reliable installer to install your Ghost immobiliser. You can be sure that the system will be properly installed and won't hinder the operation of your vehicle. The installer will also be able to give you tips on how to utilize the new device.